BrahmWorks is a Bangalore hardware studio that designs and engineers EV electronics as part of a full product stack — chargers, battery management, motor-control and power-stage work, vehicle IoT and telematics, plus the enclosures, firmware and production documentation that make those systems buildable. If you need a broader vehicle or charger product programme, see our EV product design page.

Electronics for vehicles, chargers and connected fleets

US and European teams looking for an EV electronics design partner, or a contract hardware engineering firm in India, usually need more than a concept sketch. They need schematics and PCBs, firmware, thermal and enclosure decisions, and a path to a supplier who can build the thing.

We take EV hardware from intent to a manufacturable, tested system. Industrial design, electronics, firmware, mechanical engineering, prototyping and manufacturing support work as one team, so a power, sensing or connectivity decision still holds up in the field and on the line.

Charger electronics and charging products

Charger work on our EV product design page includes charger enclosures, thermal management, cable routing and usability, as well as DC fast charging with CCS and Type 2 charging standards and IP-rated enclosures. The site also shows a high-power commercial DC fast charger (UFC400) with dual-gun dispensing, smart power management and an operator-facing UI.

On power electronics, we can work alongside your power-electronics team on charger architecture, electronics, firmware, thermal and enclosure decisions, validation, and the service experience. We will not claim to replace a specialist high-power traction-inverter house where that is what the brief actually needs; we will say so in scoping.

Battery management and power stages

Our EV electronics scope includes schematics, PCB design, battery management system (BMS) work, motor controllers and EV telematics. That sits with firmware for sensing, control and connectivity, and with mechanical design for thermal management and production-ready enclosures, including IP-rated housings where the product needs them.

Typical engagement on this side of the vehicle or energy system:

  • BMS electronics and firmware in the context of the pack, sensing and protection architecture
  • Motor-controller and power-stage boards, bring-up and control firmware, integrated with the mechanical and thermal design
  • Interface, sensing and auxiliary electronics that have to live in a vehicle or charger environment
  • Validation, DFM and documentation so a later production revision is controlled

Duty cycle, safety architecture, and which vehicle or charger standards apply are agreed in the brief. We design with those constraints in view; formal type approval or certification is a separate path, supported with labs where the brief requires it. See also our FCC and CE certification support page.

Vehicle IoT, telematics and the hardware–software bridge

Last-mile and fleet products on our site include IoT control, fleet management, safety lock mechanisms and dashboard or app interfaces. Firmware work covers control loops and links over BLE, Wi-Fi, cellular, CAN or custom buses, including the app or bridge layer when the product talks to a phone or cloud.

For export-oriented programmes this usually means:

  • On-vehicle or on-charger electronics for tracking, control, diagnostics and updates
  • Embedded firmware with logging, watchdogs and a path to production programming
  • Telematics and connectivity choices that can be taken through certification later
  • Apps, dashboards and hardware–software integration — including React apps, wireframes and UI/UX when that is in scope

Contract engineering, not only a full vehicle programme

You do not have to hand us an entire vehicle. Contract engineering is a normal way in: a charger electronics package, a BMS board spin, a telematics unit, an enclosure and thermal design, or a prototype that needs to become a production design. We also work alongside in-house power-electronics or vehicle teams rather than replacing them.

The same prototype-to-production path used on other BrahmWorks hardware applies here: design review if you already have a prototype, DFM, engineering validation, supplier briefing, pilot builds and a release pack for your CM or ours. Work is done from our Bangalore studio with teams in India and beyond.

Related EV work

Public work and capabilities on brahmworks.com include last-mile delivery EVs, urban electric motorcycles (including ORRBIKES ORR 01), DC fast charging, and EV charging software and BMS design. For the wider vehicle, industrial design and manufacturing-readiness picture, use the EV product design page. Connected-product work more generally is described on our IoT product development page.

Frequently asked questions

Are you an EV electronics design partner or only an industrial design studio?

We support the full product stack — industrial design, electronics, firmware, mechanical engineering, prototyping and manufacturing handoff. Electronics work includes schematics, PCBs, BMS, motor controllers and EV telematics.

Can you support charger power electronics?

Yes. We can work alongside your power-electronics team on charger architecture, electronics, firmware, thermal and enclosure decisions, validation and service experience. Limits of scope are agreed in the brief.

Do you only work with Indian EV companies?

No. BrahmWorks is a Bangalore hardware studio working with teams in India and beyond. This page is written for export-oriented charger, BMS, power-stage and telematics programmes as well as complete EV products.

Can you take an EV product from prototype to production?

Yes. We design for manufacture from the start and support prototyping, suppliers, testing, DFM and production-ready documentation. You can use your contract manufacturer or our build partners.

What about EMC, safety and certification for vehicles and chargers?

We design with the compliance requirements in the brief and can support pre-compliance and lab testing as a design partner. We are not a test lab and we do not issue certificates. FCC, CE and vehicle-specific approvals depend on the product and market.

How do we start?

Email sanjay@brahm.works, call +91 9902831848, or use the contact page. A two-way NDA can come first. You retain 100% of your equity and IP.

Discuss an EV electronics brief

If you need a contract electronics and hardware partner for chargers, BMS, motor-control stages or vehicle IoT, contact the Bangalore team. Email sanjay@brahm.works, call +91 9902831848, or use the contact page. Send what you already have — a block diagram, a prototype, or a target market — and we will propose a scoped next step.