Firmware & Embedded Systems Development

Embedded firmware that ships with the hardware — board bring-up, drivers, control loops, connectivity, and production programming so your product behaves reliably on the bench and in the field.

Bring your board bring-up plan

Firmware In The Product Loop

We write firmware alongside electronics and mechanical — not as a bolt-on after the boards arrive. Drivers, timing, power states, and field updates are designed with the same team that designs the PCB and enclosure.

Bring-Up & Drivers

First silicon on the bench — clocks, power rails, peripherals, and stable drivers before features pile on.

Control & Connectivity

Bare-metal or RTOS stacks, control loops, and links over BLE, Wi-Fi, cellular, CAN, or custom buses.

Reliable In The Field

Watchdogs, logging, OTA paths, factory programming, and test hooks that survive production and service.

Board bring-up

Power sequencing, boot, clocks, buses, and peripheral bring-up so hardware and software stay in sync from the first PCB.

Embedded application

Feature firmware on MCU/SoC targets — state machines, sensing, actuators, HMI, and product logic that matches the industrial design intent.

Connectivity stacks

BLE, Wi-Fi, cellular, CAN, USB, and custom protocols — including the app/bridge layer when the product talks to a phone or cloud.

Production & updates

Factory flashing, test fixtures hooks, versioning, and OTA or field-update paths designed with DFM and service in mind.

Firmware development services

What we can help you build in software-on-silicon

1

Architecture & planning

MCU/SoC selection input, boot strategy, memory map, and interface contracts with electronics
2

Drivers & HAL

Sensors, power, displays, motors, radios, and custom peripherals on real boards
3

RTOS or bare-metal

Tasking, timing, ISR discipline, and resource budgets that match the product duty cycle
4

Connectivity & bridges

Wireless and wired stacks plus phone/cloud bridges when the product needs them
5

Debug, test & fixtures

Logging, unit/hardware-in-loop checks, and hooks for production programming
6

With electronics & mech

Same studio as PCB and enclosure — fewer over-the-wall surprises at bring-up

Related paths

Electronics design — boards we bring up and program with.
EV product design — vehicle, charging, and e-mobility firmware contexts.

Prototype development — bench builds where firmware loops land first.
Prototype to production — NPI, programming, and line readiness.

Our core is embedded firmware on the product hardware. When the product needs a phone bridge or charging UX (like the Brightblu app work), we can extend into that layer with the same electronics team — scoped clearly in the brief.

We pick tools to match the board and duty cycle — common MCU/SoC families, bare-metal or RTOS, and the radios/buses the product needs. We start from your existing codebase when that is the right path.

Yes. We often begin on eval kits or early PCB spins in parallel with electronics design, then lock drivers and features as the board stabilizes.

No. Firmware sits across EV, charging, IoT, medical-adjacent devices, agri hardware, and special-purpose machines. EV and connectivity-heavy products are a strong fit, not the only ones.

Get Quote Now

Get a customised estimate for Product Development.
For more information about our tech stack, visit here.

Hardware Design Mandate

1:1 Meeting Setup

Schedule a one-on-one meeting with our Engineering team for personalised assistance and insights.

Schedule 1:1 Meeting

Ready to take the next step in your product development journey?

Contact Us

Call us at +91 9902831848
Email us at sanjay@brahm.works