BrahmWorks is a Bangalore product design and engineering company that develops IoT hardware for teams selling into global markets. We design the device, the board and the firmware together, then take the product through prototyping, certification-minded engineering and manufacturing handoff — not a concept render and a disconnected app mock-up.
Hardware, firmware, connectivity and the product around them
A usable IoT product is a system: a sensor or actuator, a power budget, a radio, an enclosure that can be manufactured, firmware that survives the field, and a path to a phone, gateway or cloud. We keep those parts in one studio so antenna placement, battery life, sealing and firmware power states are decided together.
What a typical programme can include:
- Product definition, system architecture and industrial design
- Electronics and PCB design, component selection and board bring-up
- Embedded firmware — drivers, product logic, connectivity stacks, logging, watchdogs and production programming
- Connectivity over BLE, Wi-Fi, cellular, CAN, USB or custom buses, including a phone or cloud bridge when the product needs one
- Mechanical design and DFM for the enclosure, seals, antennas and assembly
- Prototyping, validation, pilot builds and a factory release pack
Firmware can start on evaluation kits or early PCB spins, in parallel with electronics, then lock as the board stabilises. When the product needs a phone bridge or a simple cloud-facing application layer, that can be scoped with the same electronics team.
Built for manufacturing and for the field
Many connected products work on a bench and fail in production or in the field. We design for manufacture and assembly from the start, and we treat factory flashing, test-fixture hooks, versioning and update paths as part of the product, not as an afterthought.
The production path is the same one we use for other hardware: DFM and DFA, engineering validation against written acceptance criteria, supplier briefing, a measured pilot, and documentation a contract manufacturer can build from. You can keep your own CM, including one outside India, or use our fab and assembly partners. PCB work typically covers 1 to 12 layer boards, from hand-assembled prototypes to supplier SMT as volume grows. The full sequence is described on our prototype-to-production page.
Certification readiness for US and European markets
Connected products almost always have a radio, which means FCC and CE questions arrive early — especially Part 15 for the United States and EMC, safety, the Radio Equipment Directive and RoHS for Europe. We design with those requirements in view, support pre-compliance, and work with accredited test labs as a design partner. We are not a test lab and we do not issue certificates. The detail lives on our FCC and CE certification support page.
Our electronics design work already includes CE-minded design, and boards from that work have been accepted in European markets. Which marks a new product needs is confirmed during scoping.
The kinds of connected products we build
IoT at BrahmWorks is not limited to one sector. Public work and case studies include consumer and industrial connected devices, fleet and vehicle telematics, and sensor-driven products. One example is BrahmEarth, a smart-farming system with a dosing kit, sensors and a dashboard, taken from concept and PCB through DFM and DFA. Agriculture is one application of the same hardware-plus-firmware-plus-connectivity approach, not the only one.
Other connected work shown on the site includes last-mile EV IoT and fleet management, a veterinary patient monitor, wearables, and connected appliances. If your product is a new category, we still start from the same questions: what it must do, what it must survive, how it will be built, and which markets it must enter.
How engagement works for a global buyer
Start with a consultation and, if you want it, a two-way NDA. You retain 100% of your equity and intellectual property. After the first call we send a customised estimate. You can engage for a full product, or for a focused piece of work such as a PCB and firmware package, an enclosure and DFM review, or a prototype that is stuck before production. Outsourcing a complete hardware programme to India is described separately if that is the model you need.
We work from Bangalore with teams in India and beyond, in English, with a regular cadence of reviews. Time-zone overlap is strongest with Europe and usable with the US East Coast; we plan live calls in those windows and keep engineering moving in between. BrahmWorks has been building hardware since 2017.
Frequently asked questions
Are you an IoT product development company or only an agri-tech studio?
We are a hardware product design and engineering company. IoT work covers electronics, firmware, connectivity, enclosures and manufacturing support across EV, industrial, consumer and other connected products. Agriculture, including the BrahmEarth case study, is one example of that work.
Do you build only the hardware, or also firmware and app or cloud integration?
Our core is the physical product and its embedded firmware. Connectivity stacks and a phone or cloud bridge can be included when the product needs them, scoped clearly in the brief. Heavier cloud platforms can stay with your software team; we will define the interface.
Can you help with FCC and CE for a connected device?
Yes, as a design partner: design-for-compliance, pre-compliance support, and coordination with accredited labs. We do not issue FCC or CE certificates. See our certification support page for the split of responsibilities.
Can you take an IoT prototype into production?
Yes. We review the current design, close DFM and validation gaps, and hand a documented package to your manufacturer or ours, including production programming and test hooks.
Do you work with companies outside India?
Yes. We are a Bangalore studio working with teams in India and beyond. The engagement can be a full outsourced product or a contract engineering slice.
How do we start, and who owns the IP?
Email sanjay@brahm.works, call +91 9902831848, or use the contact page. A two-way NDA can come first. You retain 100% of your company equity and intellectual property.
Start an IoT product conversation
If you are looking for an IoT product development company to design, engineer and prepare a connected device for manufacture, contact BrahmWorks. Email sanjay@brahm.works, call +91 9902831848, or use the contact page. Tell us the product, the target markets, and how far you have already got.