BrahmWorks is a Bangalore hardware studio that US and European product teams can use as an end-to-end development partner. We design, engineer and prepare products for manufacture in-house — industrial design, electronics, firmware and prototyping — while you retain 100% of your equity and intellectual property.
What you can outsource to BrahmWorks
Most hardware programmes fail in the gap between a concept and a factory-ready product. We take that whole path, so you are not coordinating a design studio, an electronics freelancer and a manufacturer who have never spoken to each other. A typical engagement can cover:
- Product definition and system architecture
- Industrial design and mechanical engineering, including DFM and DFA
- Electronics and PCB design, component sourcing and board bring-up
- Embedded firmware, connectivity and hardware–software integration
- Prototyping, engineering validation and compliance-minded design
- Pilot builds, supplier briefing and production handoff to your contract manufacturer or our build partners
You do not have to buy the whole stack. Many teams start with a prototype review, a focused electronics and firmware package, or a DFM pass before tooling. Scope is agreed before parts are ordered.
How working across time zones works
Our studio is in Bangalore (India Standard Time, UTC+5:30). European mornings overlap with the Bangalore afternoon, enough for a live review and same-day follow-up. For the US East Coast, the useful window is late afternoon and evening there against early morning in Bangalore. US West Coast overlap is shorter; we plan calls at the edges of the day and keep written updates moving while you sleep. We work in English, with a regular call, a shared decision log and named owners.
IP, NDAs and who owns the work
Confidentiality is a starting condition, not a later add-on. We will share, or you can share, a two-way NDA before we discuss your project. When you develop a product with BrahmWorks, you retain 100% of your company equity and intellectual property throughout the process. We do not accept equity or IP in exchange for product development services. Design files, drawings, BOMs, firmware and the production package are delivered so you can take the work to the manufacturer you choose.
Communication and the engagement model
Work starts with a free consultation with a lead engineer. You do not need a finished brief or a complete CAD set — an idea or a prototype is enough. After that call we send a customised estimate.
Engagements are scoped in stages, so you can decide what to do next with evidence in hand:
- Explore and define: requirements, constraints, architecture and critical risks
- Design and engineer: industrial design, mechanical, electronics and firmware as one team
- Prove: prototypes, bring-up, and tests against written acceptance criteria
- Build: DFM, validation, pilot units and a release pack a factory can run
You can join at the idea stage through For Founders, or later with a prototype built in-house or by another team. Late-joining work begins with a design review and integration gap assessment. Commercial terms are confirmed during scoping.
From prototype to production, including your factory
A working prototype is not yet a product someone else can build repeatedly. Our prototype-to-production path covers DFM and DFA, engineering validation (including EVT/DVT-style loops when the brief needs them), supplier briefing, a measured pilot — often tens to low hundreds of units — and a documented handoff.
You do not have to switch manufacturers. If you already have a US, European, Indian or other contract manufacturer, we package drawings, BOMs, Gerbers, assembly notes and test gates so that factory can quote and build. If you do not have a CM, we can build with our fab and assembly partners. Boards are made with our PCB partners, typically 1 to 12 layers, by hand for early batches and on supplier SMT lines as volume grows. As a guide, simple products typically take 3–6 months and complex designs a year or more. After a review call we give you a stage-by-stage estimate.
Why Bangalore
Bangalore is one of India’s main hardware and deep-tech hubs, with supply chains across South India for prototyping and production. BrahmWorks (Brahm Works Private Limited) has been building hardware here since 2017. Electronics, mechanical and firmware sit in one studio, so a board change, an enclosure wall and a firmware power state are decided together.
For US and European teams, that means a full in-house stack, English-language engineering, and a path into Indian and other EMS production without giving up IP. We already design boards with European-market acceptance in view, and we support FCC and CE readiness as a design partner working with accredited test labs. Work on the site includes EV and charging hardware, connected products, industrial systems and consumer devices such as the TVS membrane keyboard project. Our studio is at Fourth Floor, ITI Employees Colony, No 8, New BEL Rd, Mathikere, Bengaluru 560094.
Frequently asked questions
Can a US or European startup outsource a complete hardware product to BrahmWorks?
Yes. We take products from definition through industrial design, electronics, firmware, prototyping and manufacturing support. You can also engage us for a single phase, such as a prototype review or a production handoff.
How do you handle time zones with US and EU teams?
Bangalore time overlaps well with European mornings and with late afternoon and evening on the US East Coast. We schedule live reviews in those windows and keep written progress moving during your night.
Who owns the intellectual property?
You do. You retain 100% of your equity and IP. We sign a two-way NDA before discussing the project, and we do not take equity or IP in exchange for our services.
Do you only design, or can you also support manufacturing?
Both. We design for manufacture and can stay through pilot builds, vendor briefing and early production lots, working with your contract manufacturer or our fab and assembly partners.
How much does it cost to outsource hardware development to India?
It depends on the product, tooling, suppliers, certification and pilot volume. After a free consultation with a lead engineer, we send a customised estimate. Scope is agreed before parts are ordered.
What kinds of products do you take on?
Hardware and deep-tech programmes across EV, IoT, medical and industrial systems, as well as consumer and agri products. If the fit is a focused phase rather than a full build, we will say so on the first call.
Talk to the Bangalore team
To discuss outsourcing hardware development to India, email sanjay@brahm.works, call +91 9902831848, or use the contact page. We will share an NDA if you want one in place first.