Embedded firmware that ships with the hardware — board bring-up, drivers, control loops, connectivity, and production programming so your product behaves reliably on the bench and in the field.
Firmware is where a hardware product actually comes to life, and where many products fall apart after launch. BrahmWorks writes embedded firmware that ships with the hardware: board bring-up, drivers, control loops, connectivity and production programming, so your product behaves the same on the bench, on the line and in the field.
Bring your board bring-up plan
Firmware in the product loop, not bolted on after
In many projects, firmware starts when the boards arrive and gets blamed for every problem the hardware can’t fix. We do it the other way round. Our firmware engineers work alongside the electronics and mechanical teams in the same studio, so drivers, timing, power states and field updates are designed with the people designing the PCB and the enclosure. That means fewer surprises at bring-up and fewer “can firmware work around this?” conversations late in the project.
What we build
Board bring-up and drivers. First silicon on the bench: power sequencing, boot, clocks, buses, power rails and peripherals, with stable drivers in place before features are added. See Hardware Bring-Up: What Happens After PCB Assembly?.
Embedded applications. Product firmware on MCU and SoC targets: state machines, sensing, actuators, displays and controls, and the product logic that matches what the industrial design promises.
RTOS or bare-metal. Tasking, timing, interrupt discipline and resource budgets matched to the product’s duty cycle. We work with most modern MCUs and RTOSes, and pick bare-metal when it’s simpler.
Connectivity. BLE, Wi-Fi, cellular, CAN, USB and custom protocols, including the phone or cloud bridge when the product needs to talk to an app.
Control. Control loops for motors, power electronics and actuators, tuned on real hardware.
Reliability in the field. Watchdogs, logging, over-the-air or field-update paths, and recovery behaviour so a device in a customer’s hands can be diagnosed and fixed.
Architecture decisions that save months
The cheapest time to get firmware right is before the board is laid out. We contribute to microcontroller and SoC selection, boot strategy, memory map and the interfaces between firmware and electronics, so the board has the pins, memory and test hooks the firmware will need. See Choosing a Microcontroller for a Hardware Product and Power Management in Connected Hardware.
Starting before the boards are final
Firmware doesn’t have to wait. We often start on evaluation kits or early PCB spins in parallel with electronics design, then lock drivers and features as the board stabilises. That shortens the overall schedule and finds hardware problems sooner. If you already have a codebase, we can start from it when that’s the right call.
Built for production, not just the demo
A firmware build that runs on one engineer’s desk isn’t ready for a factory. We design for production from the start:
- Factory flashing and programming steps the line can repeat.
- Test hooks for fixtures, so every unit is checked the same way.
- Version control and clear release builds.
- Update paths designed with service and DFM in mind.
- Logging and hardware-in-the-loop checks to catch regressions.
This links directly to our prototype to production work and PCB manufacturing, where boards are programmed and tested by hand or through fixtures. See also Electronics Testing Before Mass Production.
Where our firmware runs
Firmware sits across EV and charging, IoT, medical-adjacent devices, agricultural hardware and special-purpose machines. EV and connectivity-heavy products are a strong fit, but not the only one. Related reading: How IoT Products Are Engineered, EV Charging Hardware Development and Battery-Powered Field Sensors and Data Loggers. Examples from our work include the BrahmEarth smart-farming system, with sensors, a dosing kit and a dashboard. For connected products, see our IoT product development and EV product design pages.
Selected work: firmware for the BrahmEarth smart-farming system (sensors, dosing kit and dashboard).
How a firmware engagement runs
1. Brief and NDA. Two-way NDA, then the product’s behaviour, hardware target, connectivity and update needs.
2. Architecture and planning. MCU/SoC input, boot strategy, memory map and interfaces agreed with electronics.
3. Bring-up and drivers. Hardware brought up and stable drivers written for sensors, power, displays, motors and radios.
4. Application and connectivity. Product features, control and communication stacks built in sprints you can review.
5. Debug, test and fixtures. Logging, hardware-in-the-loop checks and production programming hooks.
6. Release and support. Release builds, factory programming instructions and update paths. We also provide post-launch support.
Free tool
Working on the hardware side too? Our free PCB component reference and schematic guide for power, bypass and ESD on brahmdesign.com cover the parts of the board firmware depends on.
Boards on the bench and firmware that won’t settle? Starting with an NDA, we’ll review where you are and give you a clear plan and estimate. Call +91 99028 31848, email sanjay@brahm.works or book a 1:1 with our engineering team.
Frequently asked questions
Do you only write firmware, or full product software?
Our core is embedded firmware on the product hardware. When a product needs a phone bridge or charging UX, we can extend into that layer with the same team, scoped clearly in the brief.
Which stacks and microcontrollers do you work with?
We choose tools to match the board and duty cycle: we work with most modern MCUs and RTOSes, or bare-metal where that’s simpler, plus the radios and buses the product needs.
Can firmware start before the PCBs are final?
Yes. We often start on evaluation kits or early PCB spins in parallel with electronics design, then lock drivers and features as the board stabilises.
Is this only for EV or IoT products?
No. Our firmware runs across EV, charging, IoT, medical-adjacent devices, agricultural hardware and special-purpose machines.
Can you take over an existing firmware codebase?
Yes. We can start from your existing code when that’s the right path, and review it before adding features.
Do you support devices after launch?
Yes. We provide post-launch support, including troubleshooting, updates and guidance for scaling.
Get Quote Now
Get a customised estimate for Product Development.
For more information about our tech stack, visit here.
1:1 Meeting Setup
Schedule a one-on-one meeting with our Engineering team for personalised assistance and insights.
Ready to take the next step in your product development journey?
Connect
Contact Us
© 2026. Built with ♥️ in Bengaluru.