Hardware Product Design & Engineering Services

BrahmWorks designs and engineers hardware products end to end, from the first idea to a product a factory can build. Industrial design, electronics, firmware and mechanical engineering sit in one studio in Bangalore, with prototyping, DFM and manufacturing support alongside. You get one team that owns the whole product, instead of four vendors handing problems to each other.

Discuss your product

Why one team for the whole product

Most hardware products don’t fail at the idea stage. They fail during engineering, integration or manufacturing: the board doesn’t fit the enclosure, the battery doesn’t last, the firmware can’t be flashed on a line, or the part can’t be moulded at the target cost. Each of those problems sits between two disciplines.

At BrahmWorks, electronics, mechanical and firmware are developed together, not in silos. Every design decision considers production feasibility, cost and scale. We prototype early, test in our workshop, and fix problems before they reach tooling. Read Common Hardware Product Development Failures for the patterns we see most often.

Design and engineering

Design thinking & planning. Research, use cases, competitor analysis and product definition, so the right product gets built.

Industrial design. Form, ergonomics, colour, material and finish, and production-ready CAD, designed with manufacturing in mind. See Industrial Design vs Product Engineering.

Electronics & PCB design. Architecture, component selection, schematics, PCB layout (typically 1 to 12 layers), bring-up and design for test.

Firmware & embedded systems. Bare-metal and RTOS firmware, drivers, connectivity over BLE, Wi-Fi, cellular and CAN, and production programming.

Mechanical design & engineering. Enclosures, mechanisms, tolerance stacks, mould design and prototypes in runs from 10 to 1,000 units.

DFM & DFA. Design for manufacture and assembly reviews that decide tolerances, materials, assembly sequence and cost drivers before tooling. Start with What Is Design for Manufacturing?.

Prototyping and manufacturing support

Prototype to production. DFM, validation, suppliers, pilot builds and a documented handoff to the factory.

Pilot & low-volume production. Measured pilot batches that show whether the product can be built repeatably, before you commit to volume.

Electronics & PCB manufacturing. PCB fabrication, hand and SMT assembly, programming, test fixtures and packaging.

Turnkey manufacturing. One partner coordinating parts, assembly and delivery of finished units.

Supplier & CM handoff. Release packs, drawings, BOMs and test plans your contract manufacturer can build from, whether you use your own CM, including one outside India, or our build partners.

Yes, we manufacture products for our clients. Depending on the type, quantity and materials, there are several routes, and we’ll recommend the one that fits your volumes. See How to Take a Hardware Prototype to Production.

Industries and specialist services

IoT product development. Connected devices designed as a system: sensor, power, radio, enclosure, firmware and the path to a phone or cloud.

EV product design and EV electronics. Vehicles, charging hardware and power electronics for e-mobility.

FCC & CE certification support. Design with US and European requirements in view, and pre-compliance support with accredited labs. We also support clients with BIS certification for India. We are not a test lab and don’t issue certificates.

Special purpose machines. Custom machines for production, handling, testing and field tasks that standard equipment doesn’t handle well.

Deep tech engineering. Engineering for research-heavy products that still have to be manufactured.

Outsourcing hardware development to India. For US, European and other overseas teams that want an engineering partner in India.

We work across consumer electronics, EV and e-mobility, medical devices, agriculture and agri IoT, connected products and special-purpose machines. See 10 Types of Hardware Products Founders Asked Us About.

Who we work with

  • Startups building their first hardware product.
  • Teams stuck between prototype and production.
  • Companies building in EV, IoT, medical devices and industrial systems.
  • Businesses looking for an end-to-end hardware development partner.

Examples of our work include the BrahmEarth smart-farming system and the FireFit fitness device.

Selected work:

How we work

1. Free consultation and NDA. Talk to a lead engineer. We sign a two-way NDA before you share details.

2. Scope and estimate. A clear statement of work and a customised estimate. All you need to start is an idea; sketches help but aren’t required.

3. Design and engineer. Industrial, electronics, firmware and mechanical work in parallel, with regular updates.

4. Prototype and validate. Built and tested in our workshop, then refined.

5. Prepare for production. DFM, pilot builds and a release pack.

6. Manufacture or hand off. We build with our partners or hand over to your manufacturer, and support you after launch.

For a fuller picture, read Hardware Product Development Process Explained, How Long Does It Take to Develop a Hardware Product? and How Much Does Hardware Product Development Cost in India?.

About BrahmWorks

Brahm Works Private Limited has been designing and building hardware since July 2017. Our studio is at Fourth Floor, ITI Employees Colony, No 8, New BEL Rd, Mathikere, Bengaluru 560094. Every engineer and designer is grounded in hands-on workshop experience. More on our approach and for founders.

Free tools

Our free engineering toolkit at brahmdesign.com has calculators, checklists and references for industrial design, mechanical and PCB work, including a tolerance stack calculator and a PCB trace width calculator.

Have an idea, a prototype or a product stuck before production? Start with a free consultation and an NDA. Call +91 99028 31848, email sanjay@brahm.works or book a 1:1 with our engineering team.

Frequently asked questions

What services does BrahmWorks offer?

End-to-end hardware product development: design thinking, industrial design, electronics and PCB design, firmware, mechanical engineering, DFM and DFA, prototyping, pilot production, PCB manufacturing and handoff to contract manufacturers.

Does BrahmWorks manufacture products?

Yes. Depending on the type, quantity and materials, we offer several manufacturing routes, or we can hand a complete release pack to your own manufacturer.

How can I be sure my idea stays confidential?

Every conversation is confidential, and we sign a two-way NDA before you share project details.

Does BrahmWorks take equity or IP?

No. You keep 100% of your company equity and intellectual property. We don’t accept equity or IP in exchange for development services.

Do I need drawings or design files to start?

No. All you need is an idea and a consultation. Sketches and earlier work help, but aren’t required.

How much does it cost to develop a prototype?

It depends on the product. After a free consultation with a lead engineer, we prepare a customised estimate covering the services and costs needed.

Do You Have A Project In Mind?

Starting with an NDA process, let’s make the Statement of Work together.